Celestion LF Pressed Chassis Ferrite TF1225e

* 12" Bass and mid-range driver with extended low frequency response

* 2.5" edgewound voice coil provides 96dB sensitivity and 300Wrms (AES standard) power handling

* Kevlar-loaded cone with sealed surround and damping for reduced distortion

* Double roll surround for greater excursion control

* Suitable for use in 2-way and compact 3-way systems

8 Ohm Frequency Response

! Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.

2. Measured on axis at 1W, 1m in 2p anechoic environment.

3. Xmax derived from: (voice coil winding width-gap depth)/2.

#

General

* Nominal diameter 305mm/12in

* Power rating (1) 300Wrms

* Nominal impedance 8 Ohm

* Sensitivity 296dB

* Frequency range 50-3000Hz

* Voice coil diameter 64mm/2.5in

* Chassis type Pressed steel

* Magnet type Ferrite

* Magnet weight 1.4kg/50oz

* Coil material Edgewound copper

* Former material Polyimide

* Cone material Kevlar loaded paper

* Surround material Cloth-sealed

* Suspension Single

* Xmax 33.5mm/0.14in

* Gap depth 8mm/0.31in

* Voice coil winding width 14.5mm/0.57in

Small Signal Parameters

* D 0.26m/10.24in

* Fs 61.2Hz

* Mms 53.24g/1.88oz

* Qms 4.80

* Qes 0.44

* Mmd 46.31g/1.63oz

* Qts 0.40

* Re 5.07O

* Vas 50.6lt/1.79ft3

* BI 15.41Tm

* Cms 0.13mm/N

* Rms 4.27kg/s

* Le (at 1kHz) 1.1mH

Mounting Information

* Diameter 309mm/12.17in

* Overall depth 139mm/5.47in

* Cut-out diameter 283mm/11.14in

* Mounting slot dimensions Ø 7.9mm/0.31in

* Number of mounting slots 4

* Mounting PCD range 297mm/11.69in

* Unit weight 4.4kg/9.7lb

Packed Dimensions & Weight

* Single pack size W x D x H 330mm x 330mm x 150mm / 13.0in x 13.0in x 5.9in

* Single pack weight5kg/11lb

* Multipack (60) size W x D x H 1080mmx980mmx880mm / 42.5in x 38.6in x 34.6in

* Multipack (60) weight 290kg/638lb