ARX Integrated Self Powered Loudspeaker System SPL 12

• Fully integrated active 2 way amplifier/speaker combination
• High power and low distortion provide true sonic accuracy
• ISC system protection for safe high power output
• Improved speaker response
  The close-coupled design delivers greater actual power at the speaker and improves the damping factor
• Frequency response is optimised and phase response is idealised with no potential for mis-adjustment

Applications:

• Concert Sound Reinforcement

• Auditorium Installations

• Dance Clubs

• Houses of Worship

• Theatre and Film

• Corporate A/V 

#

•  Powered (Active) - Yes

• Frequency response           50Hz - 20KHz ± 4dB

• Loudspeaker type                Low Frequency 12" 305mm 8 Ohm High Frequency 50mm voice coil 16 Ohm; FerroCooled

• HF Flare type                      Flat front Consistent Beamwidth

• Size                                    610H x 405W x 410D, 7.5° taper to back

• Weight                                 35Kg (80 lbs)

• Dispersion Nominal              90° H x 40° V

• Input Connector                    3 pin Female XLR, polarity Pin 2 +, Pin 3 –, Pin 1 Ground

• Input Impedance                    44K Balanced (electronic)

• Nominal input level 0dB for nominal rated amplifier outputs

• Input Loop Connector             3 pin Male XLR, polarity Pin 2 +, Pin 3 –, Pin 1 Ground

• Crossover Frequency              1500Hz

• Crossover Type                        24dB Linkwitz Riley Filter type

• Highpass Filters                       –3dB @ 55Hz 24dB Linkwitz Riley plus switchable Sub/Full range response curves

• Maximum SPL                          130 peak, 127 continuous

• Amplifier power                         LF 300 Watts RMS 8 ohms, 525 peak HF 150 Watts RMS 16 ohms, 300 peak

• Amplifier type                             Lateral Mosfet

• THD                                           <.01%

• Loudspeaker protection             ISC amplifier anti-clipping circuitry

                                                              Relay muted input

                                                              Relay switched output sensing DC and RF error

• Status LEDs                              AC power, HF Protect, LF Protect

• AC Power                                  110V / 220V / 240V 50 / 60Hz

• AC Power Input                          Neutrik PowerCon type NAC 3 FCA

• AC Power Loop                           Neutrik PowerCon type NAC 3 FCB

• AC Power protection                   User resettable external circuit breaker

• AC Wattage                                 Max 550 VA (550 Watts)

• Transformer type                         Toroidal

• Construction                                All premium grade void free multi-laminate plywood, with acid catalysed texture finish, steel mesh grille, top and bottom reinforced flying points and cable strain relief point