ARX introduces the MIXX 4 channel Microphone/Line mixer,with 3 way EQ on all four channels, plus Balanced XLR master outputs on the rear. It's the companion product to theMIXXMaster: another innovative mixing product. Use the MIXX for more microphone channels; use the MIXXMaster for more line channels.
Each Microphone/Line input on the MIXX has 3 way EQ and Pan controls, plus Balanced Low Noise Microphone pre-amps. All 4 Channels also have a direct output, ideal for recording applications.
Switchable Phantom power is available on all four Mic Inputs
Both the MIXX and MIXXMaster models are available as a 100 to 120V AC model or a 220 to 240V AC model, and AC power is connected to the unit via a standard three pin IEC connector, with built-in fuse and voltage change switch.
With its superb audio quality, massive headroom and intuitive interface, the MIXXMaster and the MIXX series are the total solution to today’s install requirements.
* Only 1 RU high
* Balanced XLR Mic Inputs and Outputs
* 3 way EQ and Pan controls
* Switchable Phantom power
* User friendly layout
* Flawless performance in any audio environment
* Sound Reinforcement
* Industrial Paging/BGM Systems
* AV Systems/CD/VIDEO
* Studio, Live and Broadcast Submixers
* Mic Pre-amp/Mixer for Hard disk recording, Modular Digital Multitrack, ADAT
Variable 20dB-60dB on each channel by rear panel trim control, plus Mic/Line input switch
Channel Level: Infinity to +6dB Gain
Channel Pan: True L and R constant level Control
Low 100Hz 15dB Cut/Boost Shelving
Mid 800HZ 15dB Cut/Boost Bell, Broad Q
High 10KHz 15dB Cut/Boost Shelving
Frequency Response: 20-20KHz +or- 1dB
Distortion: Below .005% 100Hz to 10KHz
Master Outputs Signal/Noise: -90dB unweighted.
+48VDC switchable on all Microphone Inputs
Electronically Balanced XLR connector
150 Ohms Line Level jack connector
Electronically Balanced XLR 300 ohms Line Level
Max Output Level: +20dB
AC Power: Supplied as 100-120 VAC model or 220-240 VAC model 50/60HZ 8VA (8 watts) 3 pin IEC connector with removable cable