Alto RMX1008 DFX


18 total inputs including 8 XLR jacks with phantom power, 8 line jacks and stereo RCA.

On-board digital effects processor and 3-shelf EQ on each mono and stereo channel

Continuous 2 x 500W power at 4-ohms; 1000W at 8-ohms Bridged

Class D Power

Mono input channels

Microphone input: Electronically balanced, discrete input configuration

Frequency response: 10Hz to 55kHz, +/–3dB

Distortion: (THD & N) 0.006% at +4dBu, 1kHz

Gain: 50dB (MIC)

SNR: (Signal to Noise Ratio) >90dB

Line input

Electronically balanced

Frequency response: 10Hz to 55kHz, +/–3dB

Distortion: (THD & N) 0.04% at +4dBu, 1kHz

Gain: 30dB

Stereo input channels

Line input: Unbalanced

Frequency response: 10Hz to 55kHz, +/–3dB

Distortion: (THD & N) 0.006% at +4dBu, 1kHz


Microphone input: 1.4kOhm

Channel Insert return: 2.5kOhm

All other inputs: 10kOhm or greater

Tape out: 1kOhm

All other output: 120Ohm


Hi shelving: +/–15dB @12kHz

Mid bell: +/–15dB @2.5kHz

Low shelving: +/–15dB @ 80Hz

Alesis DSP Section

A/D and D/A converters: 24-bit

DSP resolution: 24-bit

Type of effects

Hall, Room, Vocal & Plate Reverb

Mono & Stereo DELAY (max delay time 650ms)

Chorus, Flanger & Reverb Modulations

Reverb+Delay, Reverb+Chorus,

Reverb+Flanger combinations

Presets: 256


16-position PRESET Selector; 16-position VARIATION selector

CLIP LED; MUTE SWITCH with LED indicator

Main Mix Section

Noise: (Bus Noise) Fader 0 dB, channels muted:–85dBr (ref.:+4dBu)

Fader: 0dB, all input channels assigned and set to

UNITY gain:–71dBr (ref.:+4dBu)

Max output: +27dBu balanced, +22dBu unbalanced, 1/4" jacks

AUX Sends max out: +22dBu

Output Power Stereo mode

440W(RMS) @ 4ohm

480W(EIAJ) @ 4ohm

254W(RMS) @ 8ohm

263W(EIAJ) @ 8ohm

Bridge mode 945W @ 8ohm

Power supply Main voltage 100-120VAC ~ 60Hz

220-240VAC ~ 50Hz

Fuse 100~120V: T8A 250V

220~240V:T5A 250V

Dimensions (WxLxH): 550mm x 220mm x 210mm

Weight: 17.63 lb